Air conditioners are a wide range of home appliance used by many people during the hot seasons and even to remove heat from one area. The cooling is done by the refrigeration cycle. Air conditioning cleaning needs a lot of work along with patience. As the process of removing heat and cooling the place, lot of dirt and mold is formed. This can cause serious health problems as the contaminated air is taken in by the people causing them many health related problems. The cleaning must be done regularly as the condenser gets blocked with dirt.
Process Of Air Conditioner Repair:
The refrigerant that brings out the cool air from the air conditioning unit changes from a liquid to a gas inside the coil. The coil moves outside where the compressor lets the gas under pressure and turns out into a hot gas. This hot gas leaves the compressor and travels in the tubes of the condenser coil. Later the hot gas changes its form into a liquid to go back to the indoors to restart the cycle. This keeps on going until the dirt that is collected from the room becomes marshed into a cake in the condenser making it a block to provide the clean air. Instead the air gets polluted and causes severe health problems, if necessary cleaning up is not taken in process.
Air Conditioning Cleaning Process:
The air conditioner must be kept clean and free from debris or dust at all times. Here are few easy steps through which it can be kept cleaned.
1) The air conditioner must be switched off. Few tools like wrenches, a screw driver, hose with a nozzle and a water sprayer is used for the cleaning purpose.
2) Remove the front grill from the body of the air conditioner can be done with our air duct cleaning service.
3) Then remove the metal cover of the air conditioner and place it aside. While doing this be careful of it as it can have sharp edges.
4) Check the fan motor for any oil plugs and use caution to remove them carefully as they can be brittle. Be careful while dealing with this as they can break off in the oil holes resulting in a blockage.
5) Add a few drops of oil in the fan motor to avoid rusting. Be sure of the drops that you pour as the drops can exceed resulting in lubrication.
6) Use brush to remove the surface dust and dust from the evaporator. While doing this process be careful while you go near the fin as these are soft aluminum that can be easily damaged.
7) Use a soft rag to wipe the dirt from the fan blades and do not bend it as it can cause a vibration that would damage the motor an require ac repair miami service.
8) Use a vacuum to clean all the dust particles that are stored in and remove any debris build up from the base.
9) Make sure that you have cleaned and dried everything without any water or dirt left.


